Hey Beautiful! This site is reader-supported and we earn commissions if you purchase products from retailers after clicking on a link from our site.

Brow laminiations offer the promise of lifting and straightening your eyebrows to give you a runway-worthy look. However, it is possible that your brow lamination may not have turned out as expected. If you’re left saying, “I hate my brow lamination,” you may be wondering what, if anything, you can do about it. Well, you’re in the right place. Today, we’re going to take a closer look at what a brow lamination is. We’ll also share what you can do to try to reverse the treatment if you’re not happy with your results.

What is a brow lamination?

A brow lamination is pretty much a perm for your eyebrows. Brow laminations can help lift and straighten your brows and leave them in that position due to the perming solution used during the process. 

Brow laminations are appealing to many individuals because they can help your eyebrows look very full and gorgeous. Because the lamination is designed to last for multiple weeks, part of the appeal of a brow lamination is that you can keep that full and defined eyebrow look without extra maintenance or taking the time to apply and reapply lots of makeup.

To understand how a brow lamination works, you need to understand what perm solutions do. They break the hair bonds. This allows you or your stylist to reset the hair in the shape that you wish. For brow laminations, the desired shape is most often straight, flat, and upward-facing hairs. 

After the brows are in the position you desire, the technician applies a neutralizer. The neutralizer fixes those broken bonds and holds the current shape of the hairs in place. An eyebrow oil finishes up the procedure to keep your eyebrows and the skin around them from getting overly dry.

What happens if I don’t like my brow lamination?

While many people are excited to get a brow lamination done, some have a change of heart after seeing what their eyebrows look like after the process. Others may not be happy with the way the process changes how their eyebrows feel. Do either of these statements describe you? If so, know that it is OK if you’re not happy.

Our opinions can change after trying something out. So, what are you supposed to do if you don’t like your brow lamination? Start by taking a deep breath and remembering that a brow lamination is not permanent. With the worst case scenario, your brows should completely have grown back and cycled through within three months.

However, if you don’t want to even have to wait three months to undo the process, there are a few things you can try, which we’ll share in a few moments.

Do brows go back to normal after brow lamination?

One of the first questions people ask if they’re unhappy with their results is, “how long does brow lamination last?” The good news is that a brow lamination is not permanent. It will only last until your brows complete their growth cycle, which takes about three months. 

We have an average of 250 eyebrow hairs. Each day, we lose an average of 3 hairs as new ones grow in. With this process, it is unlikely that your brow lamination will last longer than 8 weeks. For some individuals, it could only last for about 4 weeks.

Other factors, such as whether you get your eyebrow hairs wet for the first few days, can also impact how long a brow lamination will last. Not adhering to the ‘care’ instructions to maintain the life of your brow lamination may be able to help you reverse it, if you’re not happy with the results. 

Can you reverse laminated brows?

Potential Drawbacks of Brow Laminations

Before you decide to try a brow lamination, it is important to know about some potential drawbacks of getting one done.

Irritating the Skin

Some individuals are sensitive or allergic to the perm solutions used for brow laminations. If you have this sensitivity, you may find that the skin around your eyebrows is flaky, irritated, or swollen after the procedure.


In some cases, your eyebrow technician may leave the perm solution on your brows for a bit too long. Known as overprocessing, this can leave your eyebrows very brittle and prone to breakage. You could also find yourself asking, “how do you fix frizzy brow lamination.”

Dissatisfaction with the Results

A final drawback of getting a brow lamination is the possibility that you won’t be happy with the finished product. Just because you like the way brow laminations look on other individuals, it doesn’t mean that you’ll be happy with how a brow lamination looks on you. 

brow lamination gone wrong

Can you reverse laminated brows?

Can I remove my brow lamination?

If you’re not satisfied with the way your brow lamination turned out, the ideal thing would be to let your brows grow out and wait a few months to let them return to their normal state. Because strong chemical solutions are used for brow laminations, removing them can be difficult and could cause more damage.

However, if you’re unwilling to wait and want to do everything you can to see if you can reverse the lamination, there are a few things you can try.

What You Can Do if You Are Not Happy with Your Brow Lamination

So, what can you do if you hate your brow lamination?

Below are a few suggestions that may help you get the results that you’re looking for.

Remember that brow laminations are performed using strong chemicals that are not easy to remove from your hairs. These chemicals can also make your brows more brittle and prone to breakage. So, always be cautious when trying to reverse a brow lamination.

Wash Your Eyebrows

If you want to know how to get rid of brow lamination at home, and it has only been a few hours, try to wash your eyebrows. Your technician probably advised against getting your eyebrows wet for the first 24 to 48 hours. This is important for helping them retain their shape.

However, if you’re not happy with the results, washing your eyebrows shortly after a brow lamination can prevent the neutralizers from setting. Just remember that your brows are very fragile at this time, so you could end up with other problems, such as hair loss.

post eyebrow lamination wash

Schedule an Appointment with Your Brow Artist

Another idea for how to get rid of brow lamination is to contact the stylist you used to have the procedure done. As a professional, they’ll be able to offer the best advice to help return your brows as close to their original state as possible.

Brush Your Brows

You could also try to use an eyebrow brush to brush your brows and reshape them. Just work gently and don’t expect them to immediately move to the position you desire.

Japonesque Brow & Lash Shaper with 3 Different Spoolie Brushes, for Separating Lashes, Eliminating Mascara Clumps, and Grooming and Shaping Brows
Buy on Amazon

Use a Chemical Exfoliant

If you find your brow lamination too thick and want to try to reverse it, you could use a chemical exfoliant. Using AHAs and BHAs after a brow lamination is not a good idea because they can interfere with the eyebrows setting properly, but if you’re trying to undo the lamination, that is what you want.

brow lamination too thick

Use an Eyebrow Conditioner

When you want to know how to fix over processed brow lamination, be sure to try an eyebrow conditioner. Eyebrow conditioners will help soften your brows and keep them more moisturized. While this may not change their shape, it can help reverse the brittle and dry feeling that may be bothering you.

RevitaLash Cosmetics, RevitaBrow Advanced Eyebrow Conditioner Serum, Physician Developed & Cruelty Free 1.5ml
Buy on Amazon

Don’t Panic if You Had a Brow Lamination Gone Wrong

If your brow lamination didn’t turn out like you were expecting, we understand how you are probably feeling. However, it is important to remember that a brow lamination is not permanent and that after a few weeks your eyebrows should be looking more like they once did. You may even be able to reverse or remedy the lamination by trying one of the suggestions we shared above.

Keep reading, and learn more about eyebrows and eyelashes with these related posts on our blog:


Does brow lamination ruin your brows?

Your eyebrows should return to normal within 2 or 3 months following a brow lamination. However, there is a chance for the procedure to damage your brows by making them overly dry. Damage is more likely to occur if you have brow laminations done repeatedly, especially if there is less than 6 weeks between sessions.

Does eyebrow lamination cause baldness?

If the perm solution stays on your eyebrows for too long, it can cause them to become brittle. This makes the hairs more prone to breaking or falling out. There is also a risk of damaging the brows by changing the direction they grow in too much with a brow lamination.

Why do my eyebrows feel hard after brow lamination?

The process of changing the positions of your eyebrows and setting them to stay in place can leave them feeling hard. The chemicals used during the process can also make your brows dry, which can make them feel harder. As advised by your technician, be sure to oil your brows regularly.